It also called magnetic switch, reed sensor is applicable for position determination of pneumatic and/or
hydraulic cylinder and piston pump. it also can be use as limit switch. When the magnetic object
approaches, the reed closes and sends out switch signal through magnification. Compared with inductive
sensor, it handle following strong points: can be installed in metal closely and side by side and detect
through metal object. Its detection distance subjects to the intensity of magnetic field of detected object.
Reed sensor is not applicable in the occasion on of severe vibration
Model No. & Sensing Range (mm)
| AP-RS-CS1-F | AP-RS-CS1-G | AP-RS-CSF-J | AP-RS-D-A73 |
| AP-RS-D-A93 | AP-RS-SD-63 / AP-RS-SD62 | AP-RS-D-SM2C | AP-RS-D-C73 |
TECHNICAL SPECIFICATION
| Switch Logic | NO (Normal Open) Type |
| Mode of Inductive Switch | Magnetic Reed-pipe Having Contact Kind |
| Largest Switch Current | 100 mA Maximum |
| Largest Contact Capacity | 10 W Maximum |
| Internal Consumption Current | None |
| Internal Voltage-Drop | 2.5 V Maximum@40mA DC |
| Leakage Current | None |
| LED Operation Indicate | Red |
| Cable Wire | 3.2F, 2C Grey Oil-Proof PVC |
| Induction Sensitivity | 60 gauss |
| Largest Switch Change Over | 200 Hz |
| Working Temprature (°C) | -10 – 70 |
| Shock Proof | 30G |
| Vibration Resistant | 9G |
| Protection Grade | IP67 |
| Protect Circuit | None |
| Range of Applied Voltage | 5 – 120 V DC / AC |
| indicator Light | Red |
Reviews
There are no reviews yet.